Menu
TECHNICAL INFORMATION
Specifications
| Model Number | NWR 120 | NWR 122 |
| Valve Type | Oblique, Pressure Reducing, Flanged Inlet | |
| Pressure Rating | High Pressure Valve | |
| Inlet Flange Size | DN50 | DN65 |
| Working Pressure | 20 bar Maximum | |
| Test Pressure | Valve Seat Test at 22 bar • Body Test at 30 bar | |
| Flange Drilling | BS4504 part 2: 1974 Table: 16/21 | BS4504 part 2: 1974 Table: 25/21 |
| Min. Water Flow Rate | 8.5 L/S @ 4.5 bar Outlet Pressure | |
| Min. Valve Pressure Regulating | 4 – 7 bar | |
Pressure Reducing Valve (Flanged)
Click ADD TO CART below and proceed to get quote.
Our pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.
These landing valves are pressure reducing type designed to provide a range of outlet pressure (4 bar – 7 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar.
Features
- BSI Kitemark approved.
- Body material made of copper alloy to EN 1982.
- Hand wheel material made of grey cast iron to BS EN 1561.
- Blank cap material made of copper alloy to EN 1982.
- Possible to replace the gland seal when under pressure with the valve fully closed.
- Disc facing rubber are of replaceable type.
- Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use.
- The hand is painted black and the body is painted red.
Resources
